Reference#: 4733 - TOS
BORING MILLS, HORIZONTAL, TABLE TYPE, CNC


Additional Photos

With reference to your recent request, we would like to submit
the following quotation for your consideration.
 
1 Only New TOS CNC HORIZONTAL TABLE BORING MILL
       Model WHR 130 CNC
Capacity: 5.11
Table Size: 70.86" x 88.2"
Cross Trav L/R: 118.11"
Vert Travel: 78.74"
Long Travel F/B: 49.21"
Spindle Speed: 2500 RPM
Spindle Taper: ISO 50
Spindle Travel: 31.49"
Spindle Feed: 0.04-196.85 Var. Spe
Max. Wt/Table: 26455 Lbs.
575/3/60
 
C/W SPECIFICATIONS:
TABLE & TRAVELS
Clamping surface - length x width     62.99"x 70.86"
Max. weight of workpiece              26455 lbs.
           
SPINDLE (N VERSION)
Spindle speed max.                    1800 rpm
           
SPINDLE (OPTIONAL R VERSION)
Dia.                                  5.51"
Taper                                 ISO 50 Out travel (W) 22.04"
           
DESCRIPTION:
*The WHN 130 CNC is a table type, horizontal boring
 mill with contouring CNC in command of five axes
 (X,Y, Z, W, B) and spindle orientation to 0.1 deg.,
 a T-Type bed design.  Equipped with the "HEIDENHAIN"
 TNC 426 CNC, the machine is intended for the most
 demanding machining technologies.  Also is available
 in optional travel sizes and with automatic tool
 changer (ATC), and automatic pallet changer (APC).
           
FEATURES:
"SIEMENS" 37kW (50HP) AC main drive and A.C. servodrives
 Set of Service Tools
 Operation and Maintenance Instruction Manuals Worklight
 Coolant System Attachment, CHZ 13C
 Anchoring Material, KM 13.8C
 HR 330 Electronic Hand Wheel with Selection of
 Axes Directional Push Buttons, and a 20' Cable
 Automatic Hydraulic Operated Tool Clamping, Clamping
 Force 2.5 Tons
 Hardened and Precision Ground Spindle with ISO 50 taper
 Programmable Logic Controller (part of CNC)
 Re-circulating Ball Screws on all Axes on X,Y,Z & W axes
 Cross and Longtudinal as well as Rotary Table Slide
 Surfaces Covered with TURCITE Low Friction
 Plastic Liners
 Automatic Hydraulic Locking of Rotary Table. All
  others are fixed by through feedback of drive motor
 Column and both Bed Guideways lined with hardened
  steel strip inserts
 Operator's Platform Vertically Adjustable Independent
  of the Headstock's Position
 Conduflex Cable Carriers
 Diagnostics of Machine and Operators Errors (Text Messages)
 Wide Range of Auxiliary "M" Functions
"HEIDENHAIN" measuring scales on X,Y, Z axes and ROD
 Encoder on B, rotary table & spindle Spindle chiller unit
 Bed guideways protected by sliding telescopic guards
 Automatic lubrication of all guideways
 Auxiliary operator panel with 5M cable
"HEIDENHAIN" System TNC 426, 5 axes contouring control plus
 spindle
Set of 15 pull studs (customer to specify type)
           
Feeds - Rapid Traverse - 393.70"
      - Resolution and Positioning - 0.00004
Rotary Table, B-Axis revs. T. Min -1  -  2 Main A.C. Drive - 50 H
Total Power Installed - 78 KVA
           
O/A Weight - 57200 Lbs.
 
Price:  Call 
EX SITE Toronto Plant
 
CTL *HEIDENHAIN TNC 426 CONTROL
           
DESCRIPTION:
*5 controllable axes plus spindle positioning
*4 linear axes (X,Y,Z,W), positioning in 0.001mm or 0.0001"
*5th axis B (rotary table), positioning in 0.001 deg.
*C axis (spindle), revolutions programmed directly in
 RPM, spindle positioning in 0.1 deg.
           
HARDWARE:
*Built-in 170 MB hard disk as program memory -14" colour display
*Qwerty alpha-numeric keyboard
*Electronic handwheel (manual pulse generator) -RS232C serial por
           
SOFTWARE:
*Touch probe (option): setting of workpiece datum,
 workpiece measuring in manual and automatic operation,
 corded or infrared transmission
*Digitizing module (option): 3D surface scanning and
 computing of machining path
*Tool touch probe (option): tool geometry measuring
*NC programming code: Heidenhain conversational and ISO
*Program memory: approx. 6 million NC blocks, stored
 in hard disk, unlimited number of programs
*Interpolation: Linear in 4 of 5 axes, circular
   in 2 of 4 axes, helical
*Background operation: programming, editing and
 program testing while machining is in progress
*Graphic: 3D solid model or 3 plain view,
 simultaneous with machining, program test simulation
*Positioning co-ordinates: cartesian or polar,
 absolute or incremental, metric or inch
*Co-ordinate transformation: shift, rotation,
 mirroring, scaling
*Canned cycles: peck drilling, pocket drilling, rigid
 taping (all with graphic support), capability to make own cycles
*Program restart: workpiece contour reapproach after
  tool breakdown
*Tool compensation: length and radius offset, tool
 wear compensation, tool geometry table up to 254 tools
*Parametric programming: variables, arithmetic and
 trigonometric functions, logic operations
*Help function
*External programming, data transfer and remote operation
           
OPT Automatic Tool Changer
 Tool Storage Capacity - 60 Tools
 Max Tool Diam.- Fully Loaded (alternating) - 4.92"-5.90"
 Adjacent Loc.Vacant - 11.81"
 Maximum Tool Length - 19.68"
 Maximum Tool Weight - 55 Lbs.
 Maximum Tool Weight (total) - 1670 Lbs.
 Magazine Pocket Pitch - 5.12"
 Tool Change Time (Average) - 20 Sec
 Weight of Tool Changer and Magazine - 3304 Lbs.
AUTOMATIC PALLET CHANGER:
Number of pallets            2
Optional                     3-4
Pallet clamping surface      62.99" x 62.99"
Optional                     62.99" x 70.86"
Max. weight of work piece    17636 lbs.
Clamping T-slots
   (number/pitch/size)       7/200/22H8
Dia. of centering hole                       100 H6
Total exchange time (2 pallets)              90 SEC
Positioning repeatability                    0.078"
(Machine with APC & ATC is designated as WHN 130 MC)
LD650 FACING HEAD (U AXIS) (OPTIONAL WITH N VERSION ONLY)
For face turning, external and internal cylindrical
 and conical machining
Feed of the slide (U axis) is derived from spindle
 travel (W axis) via a backlash free gearing at the rate of 1:1
Feed of the slide may be programmed by calling the W axis
Machining possible with spindle, when slide retracted
 and tool holder removed
Can be used with ATC
Facing head dia. 25.59"
Slide travel      6.69"
Max. facing head speed 150 rpm
Facing head speed with workspindle operation 500 rpm
Max. face turning dia.  39.37"
Boring dia. range 11.81"-39.37"
Accuracy (circular surface)                    JT 7
Weight                                      441 lbs.
MACHINE VERSIONS:
Increased spindle speed (2500 rpm) & dia. (140mm)
 R version                           plus
 Decreased cross travel to 78.74"   minus
 Decreased cross travel to 98.42"   minus
 Increased cross travel to 137.79"   plus
 Increased vertical travel to 98.42" plus
 Increased table size to 88.18" x 70.86" plus
 Automatic pallet changer with 2 pallets   plus
 Automatic tool changer with 60 pocket magazine
   (specify type of tooling)        plus
EQUIPMENT:
Swarf Management equipment (built to spec)        upon request
Clamping angle plate (800h x 320w x 500d)
Clamping angle plate (950h x 500w x 500d)
Clamping angle plate (1120h x 320w x 600d )
Clamping angle plate (1450h x 500w x 650d )
Clamping angle plate (1600h x 700w x 725d)
Clamping cube (500h x 500w x 530d)
Facing head
Short spindle support (N version only)
Long spindle support (N version only w/o ATC)
Vertical milling head
Universal milling head
Pull stud (specify type of tooling)
*Option pricing subject to change.


This item is subject to prior sale or may be removed from availability without any notice.
This is not an offer of sale. For an official quote, please see below.